| 世聯北京翻譯公司關于以太網鏈路相關翻譯，此類文件翻譯是世聯北京翻譯公司強項，對翻譯質量有很好的保障措施，以下就是翻譯的具體案例。 Ethernet Link 譯：以太網鏈路 The rear panel Ethernet connector (figure 4-2) on the matrix switcher BME 0 can be connected to the an Ethernet LAN or WAN. This connection makes SIS control of the switcher possible using a computer connected to the same LAN or WAN. 譯：矩陣切換器BME 0上的后面板以太網連接器（圖4-2）可以連接到以太網LAN或WAN上。該連接使利用連接到相同的LAN或WAN上的計算機進行切換器的SIS控制成為可能。 Ethernet connection 譯：以太網連接 The Ethernet cable can be terminated as a straight-through cable or a crossover cable and must be properly terminated for your application (figure 4-2). 譯：以太網電纜可以端接作為直通電纜或交叉電纜，并必須根據您具體應用場合進行正確的端接（圖4-2）。 Crossover cable - Direct connection between the switcher and a controlling computer. 譯：交叉電纜-切換器和控制計算機之間的直接連接。 Patch (straight) cable - Connection of the switcher to an Ethernet LAN. 譯：轉接（直通）電纜- 將切換器連接到以太網LAN上。 Default IP address 譯：默認IP地址 To access the Matrix 12800 switcher via the Ethernet port, you will need the Extron IP address. If the address has been changed to an address comprised of words and characters, the actual numeric IP address can be determined using the Ping utility (see appendix A, Ethernet Connection, for more details). If the address has not been changed, the factory-specified default is 192.168.254.254. 譯：為了通過以太網端口訪問Matrix 12800切換器，您需要Extron IP地址。如果地址已經被改變到含有字和字符的地址，則實際數字IP地址可以利用Ping實用程序來確定（請參見附錄A-以太網連接，了解更詳細的內容）。如果地址沒有改變，工廠規定的默認值為192.168.254.254。 If the local system administrators have not changed the value, the factoryspecified default, 192.168.254.254, is the correct value for this field. 譯：注意：如果本機系統管理員沒有改變該數值，則工廠指定默認值，192.168.254.254，對于該字段為正確的數值。 【溫馨提示】如果您有此類翻譯服務需求，可以隨時與本公司在線客服人員聯系，或者是撥打我們的服務熱線：010-64809262http://www.unitrans.cn。 
|
